My second chess set. Supports are needed for the Knights only, the rest print just fine without. This is about a 35 hour print and will take about 1/2... kg of plastic . There is some work to do afterwards putting it all together. I found that some of the parts needed a bit of filing in order to fit, try not to force anything. Especially with the pawns, they can be delicate .
3d model print parameters
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Notes:
I recommend 3 to 4 passes (1.2-1.6mm) for the perimeter on the base and risers...