Spooky toggly fidget button 3D for print
468 Views 0 Likes 0 Downloads Download
You can choose between... solid gravestones or "open" gravestones that reveal a zombie when pressed.
This version also uses a new outer case and a toggling bat that moves with the buttons.
https://youtu.be/Lcqz0BdCONg
Many of these parts have tight clearances. If your printer doesn't easily handle .125mm clearances, you ...may need to sand some parts or force them together.
A looser fitting Long Pin is available, but the default size is still recommended.
Print spring with 100% infill. Ideally, the filament path should run the length of the spring. This can be achieved by forcing the infill to be horizontal instead of diagonal or by setting the perimeter count to a high value.
Options
You can mix and match several parts of this design. Common configurations are:
2 normal gravestones
This option is the simplest and it's the best option if you plan to use this just as a fast-clicking fidget toy.
2 open gravestones with monsters
Clicking a gravestone will reveal a monster. At launch, this project includes zombies, but additional monsters will be available soon. Open gravestones are more difficult to click because you have to press on the side of the button.
1 normal gravestone and 1 open gravestone with a monster
This option is great for display because it can be set with the monster hidden
Designer
3D Printy3d model description
This Halloween remix of the Super Toggly Fidget Button switches out the buttons for gravestones and adds a few extra twists.You can choose between... solid gravestones or "open" gravestones that reveal a zombie when pressed.
This version also uses a new outer case and a toggling bat that moves with the buttons.
https://youtu.be/Lcqz0BdCONg
3d model print parameters
All parts can be printed without supports.Many of these parts have tight clearances. If your printer doesn't easily handle .125mm clearances, you ...may need to sand some parts or force them together.
A looser fitting Long Pin is available, but the default size is still recommended.
Print spring with 100% infill. Ideally, the filament path should run the length of the spring. This can be achieved by forcing the infill to be horizontal instead of diagonal or by setting the perimeter count to a high value.
Options
You can mix and match several parts of this design. Common configurations are:
2 normal gravestones
This option is the simplest and it's the best option if you plan to use this just as a fast-clicking fidget toy.
2 open gravestones with monsters
Clicking a gravestone will reveal a monster. At launch, this project includes zombies, but additional monsters will be available soon. Open gravestones are more difficult to click because you have to press on the side of the button.
1 normal gravestone and 1 open gravestone with a monster
This option is great for display because it can be set with the monster hidden
