Spool holders for ultimaker 2 3D for print

Designer

zerspaner.gerd

3d model description

Spool holder with standard Ultimaker 2 attachment! Also suitable for roller diameter 38 Suitable. With ball bearings for smooth running.
Grub screw D...IN 915 M3 x 6 for Controlled roll off available.
For "Wave V1.1"

Pause "at height" (Picture Wave pause)
1. 8.1mm break for mother. insert nut
2. 103.6mm break for mother. insert nut
My recommendation is a edge/Brime (edge lines: 20) to print with, it has been superseded with me, close to the upper hole.


"Spool holder cover V1.0"


grub screw before mounting once screwing in, then again remove.


Mounting


Alls first "Wave V1.1" mount, see drawing (or Picture EPL30006), then only in "spool holder base V1.0"
Pressing. After "Roller holder cover V1.0" sit on top. To align the "Wave V1.1" is
rotates freely. Then button head screw 2x M3x20mm tighten.

Now, the Spool holder can be mounted to the Ultimaker.
With grub screw DIN 915 M3 x 6 now the ease be adjusted. Read more

3d model print parameters

Materials and methods

- Print PLA
- 2x button head screw ISO 7380 M3x16mm
- 2x button head screw ISO 7380 M3x20mm
- 2x ball bearing deep groove ...ball bearings Type 623-3 x 10 x 4 mm (inside diameter x outside diameter x width) seal ZZ / 2Z
- 2x shims/washe DIN 988 3 x 6 x 0.5mm (inside-Ø x outside-Ø x thickness)
- 2x M3 nuts DIN 934 (for "Wave V1.1")
- 1x grub screw DIN 915 M3 x 6 Read more

Tags

Ultimaker 2 Ultimaker 2 upgrades Spool holder

License

CC Atribution