Stacka open boxa 3D for print
1369 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Everyone knows what can happen!
And if a M8 bolt get...s crazy with an M10 nut? You don't want that to happen in your workbench.
This may be the only solution - keep them apart!
-----
The main goal here was to make this project printer friendly (and keep things decent!). So the wall thickness is 1mm.
Hopefully your slicer will see this as a fast printable object without infill in walls, and it will print awesomely doing the walls like in vase mode.
-----
My tested settings:
PLA
0,4mm nozzle
0,24 layer height
3200mm/min
15% infill (for the upper section)
no supports needed
-----
You will find 2 versions, a fast printable one and another a bit slower but more robust.
Designer
Pedro3d model description
And if a M8 bolt gets crazy with an M10 nut? You don't want that to happen in your workbench.Everyone knows what can happen!
And if a M8 bolt get...s crazy with an M10 nut? You don't want that to happen in your workbench.
This may be the only solution - keep them apart!
-----
The main goal here was to make this project printer friendly (and keep things decent!). So the wall thickness is 1mm.
Hopefully your slicer will see this as a fast printable object without infill in walls, and it will print awesomely doing the walls like in vase mode.
-----
My tested settings:
PLA
0,4mm nozzle
0,24 layer height
3200mm/min
15% infill (for the upper section)
no supports needed
-----
You will find 2 versions, a fast printable one and another a bit slower but more robust.
