Stackable fuseholder 3D for print
2032 Views 4 Likes 1 Downloads Download the piece here from 3dforprint
...
https://www.youmagine.com/meduza
), he gets 100% of the credit!
Taken from original page:
A stackable fuseholder for automotive blade fuses that uses nothing more than 3D printed parts, M3 screws and regular blade connectors
I thought that most fuse holders were way too bulky for a project of mine, so i made these instead :) Print one endpiece, one startpice and as many middle pieces you want to stack for your project.
Materials and methods
For the total:
2 pcs M3 Screws of a length that suites your stack
2 pcs M3 Nuts
For each holder:
2 6.3mm blade connectors
2 pcs of cable, i used 1,5mm^2
Designer
sk8rjess3d model description
I DID NOT MAKE THIS!! I like to keep things I'm printing in one location, i'm simply uploading this from another site. The creator is Erik Cederberg(...
https://www.youmagine.com/meduza
), he gets 100% of the credit!
Taken from original page:
A stackable fuseholder for automotive blade fuses that uses nothing more than 3D printed parts, M3 screws and regular blade connectors
I thought that most fuse holders were way too bulky for a project of mine, so i made these instead :) Print one endpiece, one startpice and as many middle pieces you want to stack for your project.
Materials and methods
For the total:
2 pcs M3 Screws of a length that suites your stack
2 pcs M3 Nuts
For each holder:
2 6.3mm blade connectors
2 pcs of cable, i used 1,5mm^2
