Stamp of desire 3D for print
1321 Views 0 Likes 1 Downloads Download
The design is quite minimal. A small heart is engrave...d in the center. The shape of the pendant is irregular and imprecise, with raised edges.
The jewels could be put into a chain by your choice, thanks to a proper ring.
The model could be printed on resin for prototyiping before sending it to made in metal like gold plated brass or stain steel.
I added an indicative photo in which the pendant is attached to a normal cross chain.
If you like the design do not forget to click "like"!
#ANYCUBIC3D
19.8 x 25.7 x 6.0
Measurements are in millimeters
File is scale 1:1
Printing time: 13 minutes by FDM printer (100% filling)
Layer he...ight: 0.1 mm
Designer
GENNY3d model description
I made this pendant looking at sealing wax seals which are used to close envelopes and letters.The design is quite minimal. A small heart is engrave...d in the center. The shape of the pendant is irregular and imprecise, with raised edges.
The jewels could be put into a chain by your choice, thanks to a proper ring.
The model could be printed on resin for prototyiping before sending it to made in metal like gold plated brass or stain steel.
I added an indicative photo in which the pendant is attached to a normal cross chain.
If you like the design do not forget to click "like"!
#ANYCUBIC3D
3d model print parameters
Object size:19.8 x 25.7 x 6.0
Measurements are in millimeters
File is scale 1:1
Printing time: 13 minutes by FDM printer (100% filling)
Layer he...ight: 0.1 mm
