Kit pour transformer une breadbord en voiture Arduino
- Automatic translation at the bottom of the page -
Kit pour transformer une breadbord en vo...iture Arduino
Kit to transform a breadbord into an Arduino car
The objective is to transform its test plate into a car chassis to go straight to rolling tests.
This equipment is made with a quick kit to install and remove if you want to retrieve its original breadboard.
Characteristics :
-Kit can be added to the test plate (breadbord) temporarily or permanently according to the method of fixing (Rilsan collar, double face, hot glue, elastic or wire ...)
-The components are easy and quick to assemble or remove from the kit.
-The kit is not dedicated a particular program.
-After testing most parts of the kit can be fixed by screwing on a definitive support (plastic or wooden plate ...)
The kit consists of brackets for fixing the following components:
- test plate 830 points (Breadboard)
- Arduino Uno or Nano
- Servo motor SG90
- Plastic geared motors Dc 3V-6V, powered here with a L293D
- Module HC-SR04
- Infrared sensor type GP2D12 or GP2Y0A02YK
- Battery 9V
- Switch Ø 6 mm or sockets (see video)
The kit also consists of two wheels and a sliding pad instead of a swivel castor.
Provide: Rilsan collars, double-sided adhesive, 9V connector, Block Holder Holder 4 Accus AA. L293D. A wooden screw of 3 * 30 mm
Option: switch (here: Small 6 pins switches)
The components shown are examples, since the Kit is not reduced to a single project.