Whoop drone cross 4s night flight acro 3D for print

Designer

Microdure

3d model description

whoop cross 130 mm Night Flight Acro (axis to axis) in Polycarbonate and TPU Ultimaker.
Here is a whoop cross 130 mm (axis to axis) in Polycarbonate ...and TPU Ultimaker.
It was developed to be highly visible at night.
It is equipped with :

micro f4 20x20mm
Motors brushless 1707 - 3900kv
Propellers Lumenier 5040x4 cut to 70mm.
Quad ESC 4 X 20A Racerstar
It runs on 3S 850 mha or 4S 1000 mha
Mini controleur F4 betaflight :
http://www.banggood.com/fr/Mini-ACRO-F4-Betaflight-Flight-Controller-Buil-in-PDB-5V1A-BEC-with-Micro-Buzzer-p-1110441.html?p=LD020411878172015024

ESC 4X 20AMP Bheli S V2:
http://www.banggood.com/fr/Racerstar-RS20Ax4-V2-20A-BB2-48MHz-Blheli_S-2-4S-Opto-Oneshot42-Multishot-4-in-1-ESC-for-FPV-Racer-p-1080541.html?p=LD020411878172015024

Receiver frsky:
http://www.banggood.com/FD800-Tiny-Frsky-8CH-PPMSBUS-Receiver-Compatible-FRSKY-ACCST-X9DPlusDJTDFTDHT-For-QX95-QX90-p-1108071.html?p=LD020411878172015024

Brusheless 1707 3900kv:
http://www.myrcmart.com/rcx-h1707-3900kv-micro-outrunner-brushless-motor-p-9434.html

Small supply of screws:
16xM2 12 mm to fix the brushless on the support motors.
12xM1.6 + 12xM16 nut to fix the brushless supports to the chassis

https://www.facebook.com/Microdure/

The chassis and engine mountings are made of polycarbonate Ultimaker (260°/ 110°/ 50mm/s).
The different engine spaces 2,3,6mm, the feet and the top-plate and the lipo fixation are in TPU Ultimaker (235/75/50mm/s) to limit the vibration Read more

Tags

Whoop Ultimaker Turbines Tpu Tiny Taranis Spracing f4 Spektrum Sbus Racing Quadricoter Racing drone Racerstar Raceflight Quadcopter Frame Night flight Lumenier Multirotor Frsky Fpv racer Fpv Esc quad Edf Dsmx Dsm2 Ibus Drone Cross Cleanflight Brushless Be

License

CC Atribution