My HIVE modules are a honeycomb inspired modular drawer system
Print module at 101%-102%
Print drawers at 100%
Thanks for the blog post Adafruit! ...Thanks for the blog post lays147!
3d model print parameters
Printer: Maker Select V2
Rafts: Doesn't Matter
Resolution: 150-250 microns
Notes: Print module at 102% in order for the d...rawers to fit! Rafts are important for the drawers. Without the raft the drawer will have a square-ish bottom and you will need to sand it in order for it to fit in the module. Rafts are important for the module too. The tests I did without rafts produced a bad first layer.
My Settings: Print module at 102%
Print drawer at 100%. Shell Thickness: 1.2mm
Printing Temperature: 208C . Bed Temperature: 60C
Time: about 5 hours 40 minutes.