The key to erebor - hobbit 3D for print
1742 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The download contains a 3D model ready to be 3D printed on a 200 mm print b...ed. (STL) All cut parts are placed on the print bed as we would print them to save you time.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
The key is split into 2 parts that can be glued together. See the 3D model.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/
Designer
3D-mon3d model description
This is a digital 3D printable model of the Erebor key from The Hobbit.The download contains a 3D model ready to be 3D printed on a 200 mm print b...ed. (STL) All cut parts are placed on the print bed as we would print them to save you time.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.
The key is split into 2 parts that can be glued together. See the 3D model.
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/
