This download contains two drinkcoasters, a negative and positive one. If you print it for a drinkcoaster, i would print the negative one. Cause that ...one provides more stability for your glass/cup. Use these coasters to place your favourite drink. If you have printed it, don't hesitate to show of your skills and upload a picture.
This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:
I have printed this model with Fillamentum light grey PLA. I used 0.25mm layer height and, 18% infill. I used a 0.4mm nozzle with my extruder at 2...10 degrees Celcius. I used a heated bed. To avoid the curling up at the bottom i used a brim.
3D file format: STL
Publication date: 2020/04/14 at 21:13