Three articulating topology snakes 3D for print
5167 Views 3 Likes 0 Downloads Download the piece here from 3dforprint
See here ...for video: https://youtu.be/z7fLPr0367s
See here for stable downloads:
Serpentes nTopologus Gyroidicus (gyroid): https://thangs.com/mythangs/file/66107
Serpentes nTopologus Hexhoneycombus (Hexagonal Honeycomb): https://thangs.com/mythangs/file/66109
Serpentes nTopologus Voronoicus (Voronoi Volume Infill): https://thangs.com/mythangs/file/66110
These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.
This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.
These snakes are 72cm in length but will print easily on a 220mm x 220mm build plate.
Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.
You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.
See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k
See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591
Voronoi Viper: https://thangs.com/mythangs/file/62593
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592
Designer
DaveMakesStuff3d model description
This series of articulating snakes demonstrates various ways that nTopology can be used to design unique topology within complex designs.See here ...for video: https://youtu.be/z7fLPr0367s
See here for stable downloads:
Serpentes nTopologus Gyroidicus (gyroid): https://thangs.com/mythangs/file/66107
Serpentes nTopologus Hexhoneycombus (Hexagonal Honeycomb): https://thangs.com/mythangs/file/66109
Serpentes nTopologus Voronoicus (Voronoi Volume Infill): https://thangs.com/mythangs/file/66110
These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.
This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.
These snakes are 72cm in length but will print easily on a 220mm x 220mm build plate.
Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.
You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.
See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k
See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591
Voronoi Viper: https://thangs.com/mythangs/file/62593
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592
