Tinkerlight desk lamp 3D for print
2384 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is the desk lamp design for the Tinkerlight system. It requires the lamp hardware kit.
...
Full details of the system are at:
http://robot50.net/projects/tinkerlight/
The lamp hardware kit can be purchased on ebay at:
http://www.ebay.com/itm/LED-lamp-module-kit-for-3D-printed-lamp-designs-/152047252501?ssPageName=ADME:L:LCA:US:1123
You will also need your own USB power source.
The desk lamp has a spare design with an H base and an arm that can extend from about 9 inches of total lamp height to about 12 inches. The shade pivots and the base includes two cord keepers. The spot lens in the kit may optionally be mounted for a tighter pool of light.
The light source supplied with the kit is a neutral white (4000-4500k) LED that consumes 2.25 watts (450ma at 5 volts).
The desk lamp parts will print on most printers without supports and a 6x6x6 build platform. ABS is recommended for its higher heat resistance but the lamp will work with PLA.
Designer
BillBall3d model description
This is the desk lamp design for the Tinkerlight system.This is the desk lamp design for the Tinkerlight system. It requires the lamp hardware kit.
...
Full details of the system are at:
http://robot50.net/projects/tinkerlight/
The lamp hardware kit can be purchased on ebay at:
http://www.ebay.com/itm/LED-lamp-module-kit-for-3D-printed-lamp-designs-/152047252501?ssPageName=ADME:L:LCA:US:1123
You will also need your own USB power source.
The desk lamp has a spare design with an H base and an arm that can extend from about 9 inches of total lamp height to about 12 inches. The shade pivots and the base includes two cord keepers. The spot lens in the kit may optionally be mounted for a tighter pool of light.
The light source supplied with the kit is a neutral white (4000-4500k) LED that consumes 2.25 watts (450ma at 5 volts).
The desk lamp parts will print on most printers without supports and a 6x6x6 build platform. ABS is recommended for its higher heat resistance but the lamp will work with PLA.
