Toddler puzzle toy - pack 3D for print
3283 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
Originally I was making these puzzles from plywood manually. With 3D p...rinting is too easy=)
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25 %
Notes:
Printed in PLA with 3 perimet...ers and 4 top/bottom solid layers. Layer height: 0.2 Infill: 25% I think there is enough play to print this model in one take al combined on any printer, but if you are not confident print every piece separately.
Designer
mixedgears3d model description
A quick design in F360. The original picture was found on the net somewhere.Originally I was making these puzzles from plywood manually. With 3D p...rinting is too easy=)
3d model print parameters
Printer brand:TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25 %
Notes:
Printed in PLA with 3 perimet...ers and 4 top/bottom solid layers. Layer height: 0.2 Infill: 25% I think there is enough play to print this model in one take al combined on any printer, but if you are not confident print every piece separately.
