Tough belt clip 3D for print
5322 Views 2 Likes 2 Downloads Download the piece here from 3dforprint
This piece can be used to close GT2 belts or attach belts to fix...ed points that take an M3 screw.
The tension can be adjusted one tooth at a time, to adjust first loosen the M3 screw, pull the belt from the free end then tighten the screw back.
Can be tightened with M3 screws or even zip ties if the weight is an issue (even with zip ties it will still retain its no-slip property).
Hint: the part is designed for 6mm wide belts, if your belt is different try scaling in the Z-axis accordingly.
* Option 1 (total weight 4 grams): 1x M3 screw (12mm or more) and 1x M3 nut.
* Option 2 (total weight 2 grams): 2x small zi...p-ties.
Designer
Marius G3d model description
A GT2 belt clip that is compact, no-slip, lightweight, tough and easy to tensionThis piece can be used to close GT2 belts or attach belts to fix...ed points that take an M3 screw.
The tension can be adjusted one tooth at a time, to adjust first loosen the M3 screw, pull the belt from the free end then tighten the screw back.
Can be tightened with M3 screws or even zip ties if the weight is an issue (even with zip ties it will still retain its no-slip property).
Hint: the part is designed for 6mm wide belts, if your belt is different try scaling in the Z-axis accordingly.
3d model print parameters
Additional parts needed:* Option 1 (total weight 4 grams): 1x M3 screw (12mm or more) and 1x M3 nut.
* Option 2 (total weight 2 grams): 2x small zi...p-ties.
![[with release hole] Zipper Pull using paperclip](https://www.3dforprint.com/modelos/9420/with-release-hole-zipper-pull-using-paperclip1_medium.webp)
