Ukelele guitar 3d print 3D for print
1209 Views 1 Likes 0 Downloads Download
The only piece that needs supports is the bottom part of the body.
This project is divided in 4 pieces. The body... of the ukelele is splitted by two pieces that must be fitted together. The neck is also divided by two parts but in this case must be glued. Also, the neck is glued to the body.
Epoxy (Glue)
Nylon Guitar Strings
Fender Tuners...
Designer
Rodrigo Moura3d model description
Ukelele with 6 strings and 17 fretsThe only piece that needs supports is the bottom part of the body.
This project is divided in 4 pieces. The body... of the ukelele is splitted by two pieces that must be fitted together. The neck is also divided by two parts but in this case must be glued. Also, the neck is glued to the body.
3d model print parameters
Printed with PLAEpoxy (Glue)
Nylon Guitar Strings
Fender Tuners...
