Ulitimaker orig - modular printhead (merlin, ubis) 3D for print
3429 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
UPDATE: 5th design iteration.
The parts for the original bowden fitting wer...e not correct in V4.
There are three files now :
- printhead and wind shield
- Merlin parts
- UBIS parts
The design comprises a main part which holds the linear bearings and two interchangeable parts for mounting various hotends (Merlin, UBIS).
Used with a crossflow fan, so no fan mounts provided, but the little wind shield instead. But it shouldn't be complicated to add some fan mounts.
Designer
foehnsturm3d model description
A modular printhead which allows swapping of Merlin and UBIS hotends.UPDATE: 5th design iteration.
The parts for the original bowden fitting wer...e not correct in V4.
There are three files now :
- printhead and wind shield
- Merlin parts
- UBIS parts
The design comprises a main part which holds the linear bearings and two interchangeable parts for mounting various hotends (Merlin, UBIS).
Used with a crossflow fan, so no fan mounts provided, but the little wind shield instead. But it shouldn't be complicated to add some fan mounts.
![[Old Version] Lars' Ultralight Ultimaker XY Blocks](https://www.3dforprint.com/modelos/4649/old-version-lars-ultralight-ultimaker-xy-blocks1_medium.jpg)
