Ultimaker 2 coolboard duct for control board cooling 3D for print
1036 Views 0 Likes 0 Downloads Download
Designed for use with a 50mmx15mm blower...
fan. This duct covers all of the front area of the sheetmetal
ventilation holes that cover the board and lines up with all of the OEM
mounting holes provided, no drilling required.
This cooler is a work in progress and is meant to use a 24V blower
fan connecting to the J20 Jack ( Marked: Fan 19-24v ) port on the UM2's
control board. I will update this design once some additional testing has
been accomplished.
- (2) #6-32 Button Head Screws with nuts or (2) 35mm M3 Screws using original lock nuts
- (1) 25mm M3 Screw with nuts for... fastening the blower fan to the bottom of your UM2
Designer
Erick3d model description
This is a simple and straight forward duct to aid in the cooling of the control board under the Ultimaker 2.Designed for use with a 50mmx15mm blower...
fan. This duct covers all of the front area of the sheetmetal
ventilation holes that cover the board and lines up with all of the OEM
mounting holes provided, no drilling required.
This cooler is a work in progress and is meant to use a 24V blower
fan connecting to the J20 Jack ( Marked: Fan 19-24v ) port on the UM2's
control board. I will update this design once some additional testing has
been accomplished.
3d model print parameters
(1) 50mmx15mm blower fan.- (2) #6-32 Button Head Screws with nuts or (2) 35mm M3 Screws using original lock nuts
- (1) 25mm M3 Screw with nuts for... fastening the blower fan to the bottom of your UM2
