Ultimaker² corner 3D for print
3104 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I wanted to make a small addition to the printer. A nice thin...g besides being practical.
I noticed that the vibrations are transmitted very well at the table. I test the gasket and the vibrations is absorbed perfectly. I create a design to hold the gasket and affixed the text " Ultimaker ² Corner ".
I now offer this little gadget to improve your UM ² in addition to reduce the noise. You will need a little gasket in length, width, height is 50x50x5 mm.
-PLA/PHA...
Designer
Alexandre3d model description
I wanted to make a small addition to the printer. A nice thing besides being practical.I wanted to make a small addition to the printer. A nice thin...g besides being practical.
I noticed that the vibrations are transmitted very well at the table. I test the gasket and the vibrations is absorbed perfectly. I create a design to hold the gasket and affixed the text " Ultimaker ² Corner ".
I now offer this little gadget to improve your UM ² in addition to reduce the noise. You will need a little gasket in length, width, height is 50x50x5 mm.
3d model print parameters
-PLA-PLA/PHA...
