Ultimaker 2 fan shroud 3D for print

Designer

cor3ys

3d model description

Fan Shroud to work with Anders heater block
This is a modified Version of Spirit Fan Mount which can be found here https://www.youmagine.com/designs/...ultimaker-2-fan-mount--2#!design-information

I have been playing with Spirit fan mount and modifying it to to work with Anders heater block. I like this design because it is enclosed and stops any temperature errors caused by open bottom designs.

I have lowered the whole thing by 8mm, this means the bottom of anders heater block is 4mm - 4.5mm away from the fan shroud enclosure, this means i did not have to use any tape as per sprint original design.

I have used ABS for the shroud for the last 2 weeks and had no deformation at all (see red shroud above) and currently running a XT-CF20 shroud with no issues at all. both been run with 250 degrees temperature. Have not tried PLA for the shroud.

I have also opened up the nozzle hole to take the socket that is supplied with Anders nozzle for easy changing of nozzles.

Another link to Sprint original design https://0x7d.com/2014/12/improved-ultimaker-2-fan-mount/
Read more

3d model print parameters

I have printed it in ABS & XT-CF20

-Not tried PLA or normal XT

-M3 nuts and 14mm bolts...

Tags

Ultimaker 2 Fan mount Fan shroud Anders heater block Accessories Spare parts Utils

License

CC Atribution