Ultimaker fanduct v2 3D for print
1257 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Ultimaker fanduct V2 for use with the V2 hotend, solidworks 2...013 and step file included
Instructions:
- print with the opening of the fan in the direction of the fan for good cooling of the print
- since this print has steep angles, you get better results printing this with your ultimaker tilted (about 20-30 degrees)
- ** IMPORTANT ** use nylon spacers between aluminium and fan, otherwise PLA can become too soft during printing and deform towards the hotend
Designer
Gijs3d model description
Ultimaker fanduct V2 for use with the V2 hotend, solidworks 2013 and step file includedUltimaker fanduct V2 for use with the V2 hotend, solidworks 2...013 and step file included
Instructions:
- print with the opening of the fan in the direction of the fan for good cooling of the print
- since this print has steep angles, you get better results printing this with your ultimaker tilted (about 20-30 degrees)
- ** IMPORTANT ** use nylon spacers between aluminium and fan, otherwise PLA can become too soft during printing and deform towards the hotend
