Ultimaker left fan duct modification 3D for print
2079 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Print part, no special instructions, no support.
Remove old fan shround, remove fan from old shroud.
Add 2 nuts onto your long bolts
Slide on printed part
Attach fan with 2 nuts + 2 long bolts
Optional nut on the bottom.
tighten Nuts.
Make sure it doesn't touch your buildplate when your Y axis is zeroed.
It doesn't on mine, but file if necessary.
Designer
Valcrow3d model description
Left fan duct for the ultimaker. Bigger opening, directs air flow downwards, tight tolerances, doesn't interfere with blocks. Works on a stock ultimak...er. Nozzle v2.Print part, no special instructions, no support.
Remove old fan shround, remove fan from old shroud.
Add 2 nuts onto your long bolts
Slide on printed part
Attach fan with 2 nuts + 2 long bolts
Optional nut on the bottom.
tighten Nuts.
Make sure it doesn't touch your buildplate when your Y axis is zeroed.
It doesn't on mine, but file if necessary.
