Ultimaker 2 replacement print head 3D for print
4378 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
I created it after my second original print head got cracks.
It is a drop in replacement, you can use st...ock bearings.
The cables are fixed on the outside and the outer part is designed to be removed by only loosen the four screws.
The cables are fixed on the outside and the outer part is designed to be removed by only loosen the four screws.
Design is mostly influenced by https://www.youmagine.com/designs/modular-printhead-for-ultimaker2-v2-2 but I wanted a drop in replacement not changing the original size and shape too much and not to have to alter the firmware.
The 1.75mm version is meant to use a bowden coupling on the top. For example https://e3d-online.com/embedded-bowden-couplings-for-plastic-1-75mm-filament.
Designer
Alexander Leisentritt3d model description
This is a print head for the Ultimaker 2.I created it after my second original print head got cracks.
It is a drop in replacement, you can use st...ock bearings.
The cables are fixed on the outside and the outer part is designed to be removed by only loosen the four screws.
The cables are fixed on the outside and the outer part is designed to be removed by only loosen the four screws.
Design is mostly influenced by https://www.youmagine.com/designs/modular-printhead-for-ultimaker2-v2-2 but I wanted a drop in replacement not changing the original size and shape too much and not to have to alter the firmware.
The 1.75mm version is meant to use a bowden coupling on the top. For example https://e3d-online.com/embedded-bowden-couplings-for-plastic-1-75mm-filament.
