Ultimaker 2 tool holder - olsson block edition 3D for print
10952 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This tool holder... holds the wobbly standard hex keys that ship with the Ultimaker 2 and a set of proper hex keys in the same sizes. I used the ones from the WIHA PicoFinish 264 Ball End Hex Tools series. The OpenSCAD source can be changed easily to match other hex screwdrivers.
In addition to the original design (https://www.youmagine.com/designs/ultimaker-2-tool-holder), I added holders for pliers, wire cutter, tweezers, and a space to store 4 different nozzles and the nozzle torque wrench from Anders Olsson (http://www.youmagine.com/designs/nozzle-torque-wrench). So all the tools you need to change nozzles on "The Olsson Block" (http://umforum.ultimaker.com/index.php?/topic/7689-custom-heater-block-to-fit-e3d-nozzle-on-ultimake...).
- print with high infill for better stability
- 1.5, 2.0, 2.5, and 3.0 mm WIHA hex keys...
Designer
Reiner Bühl3d model description
Tool holder for the standard hex keys and better, screwdriver type hex keys and additional tools and nozzles for "The Olsson Block".This tool holder... holds the wobbly standard hex keys that ship with the Ultimaker 2 and a set of proper hex keys in the same sizes. I used the ones from the WIHA PicoFinish 264 Ball End Hex Tools series. The OpenSCAD source can be changed easily to match other hex screwdrivers.
In addition to the original design (https://www.youmagine.com/designs/ultimaker-2-tool-holder), I added holders for pliers, wire cutter, tweezers, and a space to store 4 different nozzles and the nozzle torque wrench from Anders Olsson (http://www.youmagine.com/designs/nozzle-torque-wrench). So all the tools you need to change nozzles on "The Olsson Block" (http://umforum.ultimaker.com/index.php?/topic/7689-custom-heater-block-to-fit-e3d-nozzle-on-ultimake...).
3d model print parameters
- PLA or ABS- print with high infill for better stability
- 1.5, 2.0, 2.5, and 3.0 mm WIHA hex keys...
![[Old Version] Lars' Ultralight Ultimaker XY Blocks](https://www.3dforprint.com/modelos/4649/old-version-lars-ultralight-ultimaker-xy-blocks1_medium.jpg)
