Ultirobot move 3D for print
1126 Views 0 Likes 2 Downloads Download
Ultimaker Robot with Movable Arm's, Leg's and Head.
Prints all in one piece, All supports are i...ncluded, just stand it up and print.
Recommended settings: Print 2 at once, 50mm/s, 205 - 210deg, 0.1mm layers.
Use a sharp knife to remove supports and carefully slide in under head to release it from body. Carefully work the limbs back and forward till they come free if stuck. If you have too many problems with the limbs sticking too much then reduce you temps and maybe print slower
Update: Increased front and back support adhesion.
Designer
Labern3d model description
Ultimaker Robot with Movable Arm's, Leg's and HeadUltimaker Robot with Movable Arm's, Leg's and Head.
Prints all in one piece, All supports are i...ncluded, just stand it up and print.
Recommended settings: Print 2 at once, 50mm/s, 205 - 210deg, 0.1mm layers.
Use a sharp knife to remove supports and carefully slide in under head to release it from body. Carefully work the limbs back and forward till they come free if stuck. If you have too many problems with the limbs sticking too much then reduce you temps and maybe print slower
Update: Increased front and back support adhesion.
