Ultra dry spool holders 3D for print
1042 Views 2 Likes 0 Downloads Download
Designed to hold moisture sensitive filaments, like PVA and Nylon.
Features:
...
3 Versions available, Narrow, Standard and Wide:
-- Narrow: spools from 140 to 210mm outside diameter and width up to 40mm;
-- Standard: spools from 140 to 210mm outside diameter and width up to 70mm;
-- Wide: spools from 140 to 210mm outside diameter and width up to 100mm;
Ball bearing design;
Largest printable part only 125 x 125 x 128mm;
Can handle heavy spools (3.5kg, 5kg);
Clear windows to check and measure remaining filament;
Blue silica holder with inspection window;
All parts designed to be printed without supports;
Included detailed assembly instructions;
(project #300417 - G.Calin - gcalin@uol.com.br - May/2017)
Alternative parts - Base and Cover for large bed printers
For those with large bed printer (250x250mm), the base and cover are now available in a single piece:
PAR300417-103_104-{version} - Base AB (ALTERNATE 3D Print x1).STL
PAR300417-105_106-{version} - Cover AB (ALTERNATE 3D Print x1).STL
These parts do not have the mounting pillars and can be printed in a single run, making assembly faster and easier.
Alternative roller
An additional roller is available:
PAR300417-024-{version} - Conic support roll BODY (3D Print x4).STL
PAR300417-025-{version} - Conic support roll PIN (3D Print x2).STL
Use large brim (20mm or so) to minimize warping
Use at least 3 shell and top/bottom layers
Us...e 35% infill
0.2mm layer works well
For Hinges and other small parts (in ABS)
High density infill (30~50%) is recommended
Use at least 2 shell and top/bottom layers
0.1mm layer gives a nice finish
Designer
Gabriel Calin3d model description
Designed to hold moisture sensitive filaments, like PVA and Nylon.Designed to hold moisture sensitive filaments, like PVA and Nylon.
Features:
...
3 Versions available, Narrow, Standard and Wide:
-- Narrow: spools from 140 to 210mm outside diameter and width up to 40mm;
-- Standard: spools from 140 to 210mm outside diameter and width up to 70mm;
-- Wide: spools from 140 to 210mm outside diameter and width up to 100mm;
Ball bearing design;
Largest printable part only 125 x 125 x 128mm;
Can handle heavy spools (3.5kg, 5kg);
Clear windows to check and measure remaining filament;
Blue silica holder with inspection window;
All parts designed to be printed without supports;
Included detailed assembly instructions;
(project #300417 - G.Calin - gcalin@uol.com.br - May/2017)
Alternative parts - Base and Cover for large bed printers
For those with large bed printer (250x250mm), the base and cover are now available in a single piece:
PAR300417-103_104-{version} - Base AB (ALTERNATE 3D Print x1).STL
PAR300417-105_106-{version} - Cover AB (ALTERNATE 3D Print x1).STL
These parts do not have the mounting pillars and can be printed in a single run, making assembly faster and easier.
Alternative roller
An additional roller is available:
PAR300417-024-{version} - Conic support roll BODY (3D Print x4).STL
PAR300417-025-{version} - Conic support roll PIN (3D Print x2).STL
3d model print parameters
For the Cover and Base parts (largest parts in PLA)Use large brim (20mm or so) to minimize warping
Use at least 3 shell and top/bottom layers
Us...e 35% infill
0.2mm layer works well
For Hinges and other small parts (in ABS)
High density infill (30~50%) is recommended
Use at least 2 shell and top/bottom layers
0.1mm layer gives a nice finish
