Um2 "olsson block" fan mount 3D for print
6574 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
*Update*
Added V2 version for stock nozzle compatibility and increased airflo...w. Included is a PDF of the Kapton tape cutouts. Print out at 1:1 and use as a template to cut the tape.
Replacement fan mount for the Ultimaker 2 for use with Olsson Block. Lowers the bottom of the fan mount while improving air flow. I was getting temp errors before with the Olsson Block cooling too quickly. This along with changing the "Fan full on at height (mm)" to 2.0 helped fix this. I printed the fan mount with ColorFabb XT-CF20 and lined the inside with Kapton tape. I've been printing at 240º without any issues so far.
Printed Settings
Layer height: 0.12mm
Shell thickness: 1.6mm
Bottom/Top thickness: 1.6mm
Fill Density : 20%
Kapton Tape...
Designer
MendellS3d model description
Replacement fan mount for the Ultimaker 2 for use with Olsson Block.*Update*
Added V2 version for stock nozzle compatibility and increased airflo...w. Included is a PDF of the Kapton tape cutouts. Print out at 1:1 and use as a template to cut the tape.
Replacement fan mount for the Ultimaker 2 for use with Olsson Block. Lowers the bottom of the fan mount while improving air flow. I was getting temp errors before with the Olsson Block cooling too quickly. This along with changing the "Fan full on at height (mm)" to 2.0 helped fix this. I printed the fan mount with ColorFabb XT-CF20 and lined the inside with Kapton tape. I've been printing at 240º without any issues so far.
Printed Settings
Layer height: 0.12mm
Shell thickness: 1.6mm
Bottom/Top thickness: 1.6mm
Fill Density : 20%
3d model print parameters
ColorFabb XT-CF20Kapton Tape...
![[Old Version] Lars' Ultralight Ultimaker XY Blocks](https://www.3dforprint.com/modelos/4649/old-version-lars-ultralight-ultimaker-xy-blocks1_medium.jpg)
