Um2 single- & dual-head fan-cages (cpv9-final) 3D for print


 Um2 single- & dual-head fan-cages (cpv9-final)  3d model for 3d printers

 Um2 single- & dual-head fan-cages (cpv9-final)  3d model for 3d printers
 Um2 single- & dual-head fan-cages (cpv9-final)  3d model for 3d printers Um2 single- & dual-head fan-cages (cpv9-final)  3d model for 3d printers
1051 Views 0 Likes 1 Downloads Download

Designer

Markus Domnick

3d model description

• CPv9 Type A...The very best alternative to the original fans-cage of the UM2 (...first design). Use Type B...For the somewhat more recent UM2 with... the ~11mm shorter print-head. • I could not yet verify, but CPv9 is probably fit to: UM 2 Go, UM 2+ Go, UM 2+, UM 2 Extended, UM 2+ Extended.
• The final status CPv9 has been reached, no major updates will follow.
• CPV 9 has been improved. The improved design reduces the accumulation of air close to the construction surface. The Hotend is now not so much influenced by the cooling, an engine stop due to the temperature-monitoring should not happen again.

• CPV 9 simultaneously cools the entire printhead and your object to be printed. Are the side fan running close to 50%, then there is (... in direct comparison to the original setup) almost no risk of burns to the user from accidentally touching the printhead assembly. Even with a defect, or inactivity of the rear fan, never poses a risk to the success of your printed product. The ColdEnd will be cooled much more efficiently, this actually reduces premature wear. At the same time the object-cooling is much more targeted and therefore more powerful than before, because the cooling air stream passes much closer to the filament outlet of the nozzle. Go ahead, give it a try and experience for yourself the great difference!

• As of today, they may all call me like an idiot, but please not before they've tried this upgrade itself. Of course I had spent before this announcement, many hours with experiments. And also I myself am very surprised with respect to the performance of this upgrade, which I had not expected.

Let's talk about 12 screws:
...Because all Ultimaker 2 users should to be very attentive now...Than here comes a ultimate free upgrade for your machine...The future is now...
• What happened if...I would say the following?
• Twelve screws on Ultimaker 2 printhead will soon be obsolete!
• You do not have to buy an additional upgrade and no other optional components, so that the Ultimaker 2 works more efficiently than before!
• You will get the opportunity to produce an upgrade for your machine itself!
• With the upgrade, you get the basic preconditions for successful dual extrusion!
• You will be able to cool one or even two ColdEnds more than adequate!
• With the same upgrade, you will also be able to cool the objects to be printed better than ever before!
• With this upgrade you need for ordinary printing operations, never again the maximum fan-performance / speed!
• Your Ultimaker 2 will be able to run more quietly!
• Maintenance of the Ultimaker 2 printhead will be easier than before!

Important information:
• For more detailed information, please see (...here and in the download package) the pictures in original size.
• Information regarding enhancements and bug fixes you will find in the "Comment" section.
• Photos with the already assembled object does not show the latest design.
• Again and again: My work for you lives solely by your feedback. If something is wrong or useless in my designs, I need more information from you so that I can ever change anything. Suggestions to improve or simplify my designs and descriptions are highly desirable. So if you use my designs and parts thereof, please take a few moments to convey a little feedback.

How I Designed This:
Maybe even as a layman with little technical understanding it can be seen very quickly, the setup of all currently available UM2's needs in many ways optimizations. That is why there is CPv9 and I'm glad to have done it :-)


3d model print parameters

Whatever you want to use :-)
• If you work exclusively with PLA, it is quite enough if they also make the upgrade with this material...really!
... If you also want to continue working with ABS and more specific materials, please make the upgrade, at least with ABS.
• Take 5 mm wide Kapton film and insulate so the Hotend as much as possible. If you make it as suggested then you reduce external contamination on the Hotend effectively, and an improved temperature-stability is achieved.
• The red marked areas in the design, these are necessary support elements. If you want This Design Print in PLA, then no further optimizations in the slicer are regularly required. You may want to print with very low temperatures, so that the support elements can be easily removed from the object later. For most PLA varieties I recommend a temperature in the range of ~ 195 °.

Small addition:
• The fan cages are not made of metal and much more sensitive than the originals. That is why it is a good idea to print each variant more than once to get a spare part is in stock.
- Smaller drooping deformations near the hottest zones can be easily corrected with a nail file.
• Before printing of very large objects, you need to check if risk of collision with the glass bed retaining clips. The perforated insulator bolt at the ColdEnd (Teflon-piece), allows you to slightly adjust the Z position of the Hotend. Then be sure to realign the print bed.
• The CPv9 design is slightly wider than the original UM-design, we lose a few millimeters building area. Please also indicate what adjustments need to be optimized in the Cura-machine settings.
• The UM-original cages may differ slightly in their dimensions, since it is folded sheet metal, and sometimes it might already be too bent on some machines. Of course, several measurements at different UM2s are good for adaptations so people, please join...


Tags

Ultimaker 2 Um2 Um2 upgrade Fans Fan Fan mount Fan holder Fan bracket

License

CC Atribution

Related 3d models with tags

Ultimaker 2 Coolboard Duct for Control Board Cooling

Ultimaker 2 Coolboard Duct for Control Board Cooling

UM2 Printhead Replacement

UM2 Printhead Replacement

Ultimaker extruder gear upgrade (w/ bigger hex nut hole)

Ultimaker extruder gear upgrade (w/ bigger hex nut hole)

Olsson-Block Tools base

Olsson-Block Tools base

Belt Geared UM2 Feeder Upgrade

Belt Geared UM2 Feeder Upgrade

Ultimaker2 Cable Chain

Ultimaker2 Cable Chain

UM2 Bearing Filament Guide

UM2 Bearing Filament Guide

UM2 Feeder - SP3D Version

UM2 Feeder - SP3D Version

Ultimaker 2 Spring Replacement

Ultimaker 2 Spring Replacement

TwisterBlocks

TwisterBlocks

Ultimaker 2 LED-Fix

Ultimaker 2 LED-Fix

UM2 Belt Tensioner

UM2 Belt Tensioner

Ultimaker 2 Compact Fan Ducts

Ultimaker 2 Compact Fan Ducts

Filament Guide Tube Support

Filament Guide Tube Support

Universal Ultimaker 2 Spool Holder

Universal Ultimaker 2 Spool Holder

Ultimaker Extruder Mutli Clip

Ultimaker Extruder Mutli Clip

UM2 Extrusion Upgrade Kit Mount for UMO+

UM2 Extrusion Upgrade Kit Mount for UMO+

Dovetailed Mounting System

Dovetailed Mounting System

UM2Feeder V3.1.1

UM2Feeder V3.1.1

Motor corner alternative

Motor corner alternative

meduza um2 belt geared feeder improved

meduza um2 belt geared feeder improved

35x35 12VDC UM2 family Centrifugal Fan Shroud

35x35 12VDC UM2 family Centrifugal Fan Shroud

Nozzle Case

Nozzle Case

Alternative UM2 Feeder - version two

Alternative UM2 Feeder - version two