Universal pellet extruder - reprap 3d printing 3D for print
3742 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
It's aimed... as an open community project, so please get involved, share, develop and enhance the design process. Make upgrades and share both files and experiences so we can make a really good low cost solution for pellet based 3D printing..
More info is up on my blog here - http://richrap.blogspot.co.uk/2014/12/no-more-filament-quest-for-universal.html
Print out parts
Use M4 screws to connect the body parts.
M...3 screws for locking in the J-head nozzle and also the motor.
Two designs are uploaded - One using an earlier NEMA17 motor (5mm Shaft), and another one for a Planetary gearboxed NEMA17 - output shaft is 8mm (NEMA23 type)
Designer
Richard Horne3d model description
Hi Everyone, this is my design for a open-source, Universal plastic pellet /granular material extruder for RepRap (and other) 3D printers.It's aimed... as an open community project, so please get involved, share, develop and enhance the design process. Make upgrades and share both files and experiences so we can make a really good low cost solution for pellet based 3D printing..
More info is up on my blog here - http://richrap.blogspot.co.uk/2014/12/no-more-filament-quest-for-universal.html
3d model print parameters
Just a basic BOM at the moment, most is obvious by looking at the files, and pictures.Print out parts
Use M4 screws to connect the body parts.
M...3 screws for locking in the J-head nozzle and also the motor.
Two designs are uploaded - One using an earlier NEMA17 motor (5mm Shaft), and another one for a Planetary gearboxed NEMA17 - output shaft is 8mm (NEMA23 type)
![[WIP] CerbrisReborn 1.75mm bowden extruder](https://www.3dforprint.com/modelos/4801/wip-cerbrisreborn-mm-bowden-extruder1_medium.jpg)
