Universal smartwatch dock vol 2 - samsung, huawei, garmin, pebble etc. 3D for print
621 Views 0 Likes 0 Downloads Download
For Apple, Samsung etc. please also see my my earlier post: https://www.thingiverse.com/thing:5636189
UP...DATE: Upon request I have now made a smartwatch stand (using the existing adapters) with QI charger: https://www.thingiverse.com/thing:5722739 Happy printing!
If you can't find a dock/adapter that fits your smart watch either here or my previous post, send me the dimensions and I will try to make one for you. Anything that works with the adapter will go to the above post, anything that requires a new dock goes here.
The story continues. However, this time without adapter, for e.g. Garmin, Huawei, Pebble, Cycplus, Amazfit watches and once again any other brand, as long as you send detailed specifications, so I can create the corresponding stands. Basically this is a collection of different docks, rather than a single dock with multiple adapters, mainly for the slightly more exotic brands (...well kind of).
I found my first post was getting a little messy when, in addition to the adapters I started adding new docks (BTW thx to everyone who sent in suggestions for new adapters). This design is not meant to replace the first post, rather to complement it. In essence this is a remix (don't know why I can't chose 'remix' when creating a new thing) of my earlier smart watch dock with adapter, however with a few differences:
These are intended to be used without adapters. Some smartwatch chargers just wouldn't fit the adapter design (e.g. Garmin)
There is now an XL version, which allows for charging pucks up to 46 mm (previously with adapter up to 36 mm), e.g. Huawei GT2
What has not changed: if you send me the exact specifications (preferably with an image) I will be happy to make more docks and/or adapters
I print the docks using this incredibly easy to print Carbon Fiber PLA , which gives this beautiful soft touch and semi-gloss shine,
... and the adapters (if needed) in Silk Silver, Bronze, or Copper.
PRINTING
Printing is super easy. Print at 0.2+ resolution and with approx. 30%+ infill. No supports (as long as the cable comes out right or left) or build plate adhesion needed (other than what you always use).
I really hope you like the design and find it useful. If you feel like tipping (thanks in advance), rather than clicking the "Tip Designer" button, PLEASE donate to UKRAINE (or any other people in need). There is a cold winter ahead and these people will need any help they can get (a lot more than I do)! THANKS!!
HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!
Designer
e&h Design3d model description
Part 2 of my Universal Smartwatch DocksFor Apple, Samsung etc. please also see my my earlier post: https://www.thingiverse.com/thing:5636189
UP...DATE: Upon request I have now made a smartwatch stand (using the existing adapters) with QI charger: https://www.thingiverse.com/thing:5722739 Happy printing!
If you can't find a dock/adapter that fits your smart watch either here or my previous post, send me the dimensions and I will try to make one for you. Anything that works with the adapter will go to the above post, anything that requires a new dock goes here.
The story continues. However, this time without adapter, for e.g. Garmin, Huawei, Pebble, Cycplus, Amazfit watches and once again any other brand, as long as you send detailed specifications, so I can create the corresponding stands. Basically this is a collection of different docks, rather than a single dock with multiple adapters, mainly for the slightly more exotic brands (...well kind of).
I found my first post was getting a little messy when, in addition to the adapters I started adding new docks (BTW thx to everyone who sent in suggestions for new adapters). This design is not meant to replace the first post, rather to complement it. In essence this is a remix (don't know why I can't chose 'remix' when creating a new thing) of my earlier smart watch dock with adapter, however with a few differences:
These are intended to be used without adapters. Some smartwatch chargers just wouldn't fit the adapter design (e.g. Garmin)
There is now an XL version, which allows for charging pucks up to 46 mm (previously with adapter up to 36 mm), e.g. Huawei GT2
What has not changed: if you send me the exact specifications (preferably with an image) I will be happy to make more docks and/or adapters
3d model print parameters
FILAMENTI print the docks using this incredibly easy to print Carbon Fiber PLA , which gives this beautiful soft touch and semi-gloss shine,
... and the adapters (if needed) in Silk Silver, Bronze, or Copper.
PRINTING
Printing is super easy. Print at 0.2+ resolution and with approx. 30%+ infill. No supports (as long as the cable comes out right or left) or build plate adhesion needed (other than what you always use).
I really hope you like the design and find it useful. If you feel like tipping (thanks in advance), rather than clicking the "Tip Designer" button, PLEASE donate to UKRAINE (or any other people in need). There is a cold winter ahead and these people will need any help they can get (a lot more than I do)! THANKS!!
HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!
