Sink plug strainer 3D for print
948 Views 0 Likes 0 Downloads Download
after cleaning up a bit, push the pin through the... strainer and put them on top of the plug. then push the pin firmly through the plug. Done.
I had some difficulties in printing the outer curve of the strainer, but it's invisible when in use. After printing, just file away the support pins under the cup using a flat metal file.
all components have been printed with 100% infill and a shell thickness of 2mm
- the strainer: printed in PLA
- the pin: printed in PLA
- the plug: printed in Flex-PLA...
Designer
Christian3d model description
Our Ikea kitchen sink plug has always been leaking. This is a replacement plug that actually works.after cleaning up a bit, push the pin through the... strainer and put them on top of the plug. then push the pin firmly through the plug. Done.
I had some difficulties in printing the outer curve of the strainer, but it's invisible when in use. After printing, just file away the support pins under the cup using a flat metal file.
all components have been printed with 100% infill and a shell thickness of 2mm
3d model print parameters
it's made out of 3 parts:- the strainer: printed in PLA
- the pin: printed in PLA
- the plug: printed in Flex-PLA...
