Vader style mask 3D for print
2012 Views 0 Likes 10 Downloads Download
If you enjoyed this design, please click the Like button and follow me here on Cults3D.
https://cults3d.com/en/users/ad...amantiz/creations
or buy me a coffee to help keep me fueled.
https://adams.coffee
If you could also upload a picture of your make, it would help others to find this design.
If you find any issues with this design, please leave a comment at the bottom of this page.
Thanks!
This mask has been shaped to fit an adult size face.
If printing with PLA:
After printing, warm it with a heat-gun or hot water to shape it to the contours of your face. Take care not to burn your face.
Take your time to shape the mask and a good tight but comfortable seal can be achieved. Cover the vents with the palms of your hands to check for air flow.
Strap slots are made to fit 12mm * 2mm elastic straps.
The mask has no filters but you might use it to hold some form of filter material against your face, eg. a microfibre cloth or surgical mask. Or use duct tape to tape some filter inside the mask.
(See the Update #2 note below)
Disclamer: This design carries no form of guarantee! The designer cannot be held liable on any grounds, if anyone uses a physical copy of this mask for any purpose.
UPDATE #1
I found that the Strap-slots do not bite onto the straps very well. So I made some Strap-Locks (buckles) to hold them more securely.
Please also download the StrapLocksX4.stl &/or the StrapLockX1.stl
UPDATE #2 :
@ Chbreedmhn has come up with an innovative way to install a filter into the mask, using an insert. Please see their mod here...
https://cults3d.com/en/3d-model/gadget/vader-mask-covid19-filter-mount
I did begin to make an insert for the mask before I published it. However on the pre-release version of the mask, the bars of the front grill were too thin and brittle, so I had to make them thicker. Which meant my inserts would no longer fit.
I have now uploaded the .OBJ files for the mask and the incomplete grill inserts - for those who wish to make further modifications to the mask.
Please leave me a message if you publish any modifications and I will leave an update here to help others to find them.
Thanks!
File List:
VM_RSRMRT_V1.stl
StrapLocksX4.stl
StrapLockX1.stl
VM_RSRMRT_V1.obj
StrapLocks.obj
FrontGrill_Insert.obj (incomplete)
BottomGrill_Insert.obj (incomplete)
Tag Sauce:
adam, art, darth, vader, vader mask, vader style, sculpture, mandalorian, yoda, star wars, force, helmet, alien, fashion, accessory, hardcore, rave, techno, cosplay, dust, mask, 2020, covid, filter, virus, coronavirus, corona, printing, printed, printable, 3D, printer,
Fill Gaps Between Walls : Everywhere. Z Seam Alignment : Sharpest Corner
Seam Corner ...Preference : Hide Seam. Infill Density 15% (minimum, you may prefer up to 100%)
Infill Patern Cubic Subdivision. Support Placement : Everywhere
Support Pattern : Concentric.Support Density : 20%
Build Plate Adhesion Type : Raft. Raft Extra Margin : 10
Raft Smoothing : 5. Raft Air Gap : 0.2
Raft Top Layers : 1. For Temperature Settings refer to your printer manual.
Strap-Locks may be printed without raft or supports.3D file format: OBJ and STL.
Designer
ADAMANTIZ3d model description
Please see the Update notes.If you enjoyed this design, please click the Like button and follow me here on Cults3D.
https://cults3d.com/en/users/ad...amantiz/creations
or buy me a coffee to help keep me fueled.
https://adams.coffee
If you could also upload a picture of your make, it would help others to find this design.
If you find any issues with this design, please leave a comment at the bottom of this page.
Thanks!
This mask has been shaped to fit an adult size face.
If printing with PLA:
After printing, warm it with a heat-gun or hot water to shape it to the contours of your face. Take care not to burn your face.
Take your time to shape the mask and a good tight but comfortable seal can be achieved. Cover the vents with the palms of your hands to check for air flow.
Strap slots are made to fit 12mm * 2mm elastic straps.
The mask has no filters but you might use it to hold some form of filter material against your face, eg. a microfibre cloth or surgical mask. Or use duct tape to tape some filter inside the mask.
(See the Update #2 note below)
Disclamer: This design carries no form of guarantee! The designer cannot be held liable on any grounds, if anyone uses a physical copy of this mask for any purpose.
UPDATE #1
I found that the Strap-slots do not bite onto the straps very well. So I made some Strap-Locks (buckles) to hold them more securely.
Please also download the StrapLocksX4.stl &/or the StrapLockX1.stl
UPDATE #2 :
@ Chbreedmhn has come up with an innovative way to install a filter into the mask, using an insert. Please see their mod here...
https://cults3d.com/en/3d-model/gadget/vader-mask-covid19-filter-mount
I did begin to make an insert for the mask before I published it. However on the pre-release version of the mask, the bars of the front grill were too thin and brittle, so I had to make them thicker. Which meant my inserts would no longer fit.
I have now uploaded the .OBJ files for the mask and the incomplete grill inserts - for those who wish to make further modifications to the mask.
Please leave me a message if you publish any modifications and I will leave an update here to help others to find them.
Thanks!
File List:
VM_RSRMRT_V1.stl
StrapLocksX4.stl
StrapLockX1.stl
VM_RSRMRT_V1.obj
StrapLocks.obj
FrontGrill_Insert.obj (incomplete)
BottomGrill_Insert.obj (incomplete)
Tag Sauce:
adam, art, darth, vader, vader mask, vader style, sculpture, mandalorian, yoda, star wars, force, helmet, alien, fashion, accessory, hardcore, rave, techno, cosplay, dust, mask, 2020, covid, filter, virus, coronavirus, corona, printing, printed, printable, 3D, printer,
3d model print parameters
Z Hop When Retracted : Yes!. Top & Bottom Pattern : ConcentricFill Gaps Between Walls : Everywhere. Z Seam Alignment : Sharpest Corner
Seam Corner ...Preference : Hide Seam. Infill Density 15% (minimum, you may prefer up to 100%)
Infill Patern Cubic Subdivision. Support Placement : Everywhere
Support Pattern : Concentric.Support Density : 20%
Build Plate Adhesion Type : Raft. Raft Extra Margin : 10
Raft Smoothing : 5. Raft Air Gap : 0.2
Raft Top Layers : 1. For Temperature Settings refer to your printer manual.
Strap-Locks may be printed without raft or supports.3D file format: OBJ and STL.
