Vase #607 3D for print
3723 Views 0 Likes 0 Downloads Download
This vase can be printed in vase m...ode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The photo shows vase not scaled at 100% of the stl file at 67mm wide for X and Y and Z is 110mm tall. It has not been tested for being watertight and probably isn't printed in vase mode. If you make it, please post a photo, I'd like to see your print!
Enjoy...
(Notes below...... :)
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0
Filament brand:
CC3D
Filam...ent color:
bronze
Filament material:
pla
Notes:
The stl file is not hollow. This allows you to print in vase mode or regular mode and put as many walls and make it as thick as you want. Don't just blindly download and start printing, you will get a nice solid vase, great for, well I don't know what for, but not a pencil holder! Use 0 top layers, 0% infill if not printing in vase mode. I used a wall line width of .8 and a layer height of .2, other widths might work, I haven't tried them. The print should take approximately 1 hour 10 minutes at 40mm/s using vase mode.
Designer
Steve Warren3d model description
Use the 'download' button under the 'thing files'. For some reason Thingiverse started giving me this 404 error.This vase can be printed in vase m...ode or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The photo shows vase not scaled at 100% of the stl file at 67mm wide for X and Y and Z is 110mm tall. It has not been tested for being watertight and probably isn't printed in vase mode. If you make it, please post a photo, I'd like to see your print!
Enjoy...
(Notes below...... :)
3d model print parameters
Printer brand:Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0
Filament brand:
CC3D
Filam...ent color:
bronze
Filament material:
pla
Notes:
The stl file is not hollow. This allows you to print in vase mode or regular mode and put as many walls and make it as thick as you want. Don't just blindly download and start printing, you will get a nice solid vase, great for, well I don't know what for, but not a pencil holder! Use 0 top layers, 0% infill if not printing in vase mode. I used a wall line width of .8 and a layer height of .2, other widths might work, I haven't tried them. The print should take approximately 1 hour 10 minutes at 40mm/s using vase mode.
