Vase #363 3D for print
1273 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Enjoy...
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0
Filament brand:
HZST3D
Fil...ament color:
silk purple
Filament material:
pla
Notes:
The stl file does not have a bottom on it. But cura, when printed in spiralized outer contour, will put a bottom on the model. You can still uncheck spiralize and print 3 or more bottom layers and 2 or more walls if you want to. Prusaslicer doesn't like the vase. It makes the vase with several missing layers, in spiral vase. So, check your print settings carefully and be sure and watch the preview.
Designer
Steve Warren3d model description
Print in vase mode or spiralize outer contour. Or, uncheck spiralize outer contour, set top layers to 0. Bottom layers set to 3 or more. Set walls to ...2 or more for a more sturdy vase. Can be scaled to fit your needs. Photo shows vase scaled to 112mm tall, 88mm wide. It has not been tested for being watertight. If you make it, please post a photo, I'd like to see your print!Enjoy...
3d model print parameters
Printer brand:Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0
Filament brand:
HZST3D
Fil...ament color:
silk purple
Filament material:
pla
Notes:
The stl file does not have a bottom on it. But cura, when printed in spiralized outer contour, will put a bottom on the model. You can still uncheck spiralize and print 3 or more bottom layers and 2 or more walls if you want to. Prusaslicer doesn't like the vase. It makes the vase with several missing layers, in spiral vase. So, check your print settings carefully and be sure and watch the preview.
