I have printed this model in Fillamentum concrete grey PLA and Octofiber yellow PLA. I have used 0.25mm layer height and 18% infill. I have used a... heated bed at 55 degrees Celsius and my nozzle size is 0.4mm and was heated at 210 degrees Celsius. I have used a brim to ensure adhesion to the build plate. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. I paused the print at the point when the helping hands logo begins, changed filament, and resumed the print. Don't worry to use your own settings while this isn't a difficult model.
3D file format: STL
3D model size: X 100 × Y 100 × Z 5 mm
Publication date: 2020/10/24 at 08:40