Lampshade that should fit on some IKEA/Target lamps and more
This lampshade was designed with Fusion360, Meshmixer, and Netfabb. The hole at the base... is 40mm. The lattice structure is around 3mm thick and the internal piece for light defuse is 1.2mm thick
3d model print parameters
This was designed with the intention of being printed on EOS formiga SLS printers, but if you have a solid FDM printer, it might be up to the challeng...e. If you do want to print it with FDM, I definitely recommend adding a z-hop into your slicer settings and cutting off the bottom 0.2mm or so since it is not completely flat.