Wallace g1 3d printer 3D for print
7343 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
NOTE! Updated Stiffer bed design. May 1 2015
Based on the original ...Wallace design by whosawhatsis.
With all the Upgrades I've added to mine.
Rack & Pinion X & Y drives.
Spool Hook and Motor stabilizer ends.
Filament guide.
Y-Liner bearings removed from motor blocks
End Stop switch mounts.
And new here, Printable Bed!
Print samples added to images.
White is .2mm layers Orange is .1mm layers
Only thing not included here is the Extruder. I recommend thing:40002 ;)
Current print area: 200x180x200
When I get the longer Y Rods: 200x200x200. That will come with new Bed Rear parts.
BOM and Build instructions started at :
http://gkprotoforms.ca
in How-To section.
Designer
Lance F. Squire3d model description
My Rack & Pinion drive printer based on the Wallace design by WhosawhatsisNOTE! Updated Stiffer bed design. May 1 2015
Based on the original ...Wallace design by whosawhatsis.
With all the Upgrades I've added to mine.
Rack & Pinion X & Y drives.
Spool Hook and Motor stabilizer ends.
Filament guide.
Y-Liner bearings removed from motor blocks
End Stop switch mounts.
And new here, Printable Bed!
Print samples added to images.
White is .2mm layers Orange is .1mm layers
Only thing not included here is the Extruder. I recommend thing:40002 ;)
Current print area: 200x180x200
When I get the longer Y Rods: 200x200x200. That will come with new Bed Rear parts.
BOM and Build instructions started at :
http://gkprotoforms.ca
in How-To section.
