White swan #earrings #feather 3D for print
3701 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Printing time (of the single feather): 16 minutes
Layer height: 0.1mm
Infi...ll density: 10%
Print Speed: 50mm/s
Travel Speed: 100mm/s
Support: none
Material: Pla (white)
The hook is 14.45 mm high, 7.40mm large and 0.5mm (max) deep.
Printing time (of the single hook): 0 minutes (15-20 seconds)
Layer height: 0.1mm
Infill density: 10%
Print Speed: 50mm/s
Travel Speed: 100mm/s
Support: none
Material: Pla (white)
Designer
OMARGATT3d model description
The elegance and the grace of the swan inspired these earrings, which reworks the shapes of a typical feather: it's a pair of mirrored objects, charac...terized by sinuous and extremely accurate surfaces lightened by a series of holes. The circular holes located on the upper part of each object have been designed to fit to the hook, integral part of the work: after several design, printing and wearing tests, the result is a universal hook which has proved to be particularly functional in the practice #ANYCUBIC3D3d model print parameters
The single feather is 30.60mm high, 12.50mm large and 5.20mm (max) deep.Printing time (of the single feather): 16 minutes
Layer height: 0.1mm
Infi...ll density: 10%
Print Speed: 50mm/s
Travel Speed: 100mm/s
Support: none
Material: Pla (white)
The hook is 14.45 mm high, 7.40mm large and 0.5mm (max) deep.
Printing time (of the single hook): 0 minutes (15-20 seconds)
Layer height: 0.1mm
Infill density: 10%
Print Speed: 50mm/s
Travel Speed: 100mm/s
Support: none
Material: Pla (white)
