Windmill 3D for print
4109 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The wing is aerodynamically optimally calculated (high speed = 3, power = 20 watts at 10 m / s wind speed).
Designer
laserdisk3d model description
Parts for a small wind turbine (D = 33 cm) Axis: 5 mm threaded rod Bearing: Radial bearing (D outside = 16 mm, D inside = 5 mm) The wing, nose and hub... are connected with M4x53mm screws. Next parts: disk generatorThe wing is aerodynamically optimally calculated (high speed = 3, power = 20 watts at 10 m / s wind speed).
