This is the brooch which the fellowship got from Galadriel in Lothlorien from the "Lord of the Rings" movies.
I designed two versions - one for a o...ne-colored version and another for a two-colored version.
3d model print parameters
Printer brand:
FlashForge
Printer:
Creator Pro
Rafts:
Yes
Supports:
No
Resolution:
0.18mm
Infill:
30%
Notes:
For a one-colo...red version - I used a silver PLA:
Print "brooch_onepiece.stl" and done :-)
I used ERYONE Silky Shiny Filament PLA.
For a two-colored version, there are different ways:
I) If you have a printer with two nozzles:
a) You print "brooch_lowerpart.stl" and "brooch_upperpart.stl" in one job - done.
b) You print "brooch_lowerpart.stl" with one nozzle as first job and than print "brooch_upperpart.stl" together with "spacer.stl" as second job on top of the first print.
This what I did.
II) If you have a printer with one nozzle:
a) You print "brooch_onepiece.stl", pause at 2mm, swap material and continue printing.
b) You print "brooch_lowerpart.stl" with first material, leave the print on the plate. Than swap material and print "brooch_upperpart.stl" together with "spacer.stl" as second job on top of the first print.