Wulbi - washing up liquid bottle inverter 3D for print
2686 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is an attachment to save you having to wait for a small amount of liquid soap to trickle to the dispensing end of the bot...tle. Yes, there are other ways to solve this world problem but they don't involve messing around with 3D printers! :)
Unscrew the top, fit the WULBI and screw the top back on. Stand the bottle on the WULBI. Soap can be dispensed immediately!
Resolution: 0.20 mm
Speed 50mm/s
Material: PETG
Nozzle Temp: 240°
Bed Temp: 70°
Infill: 10%
Walls: 3
Top Layers: 4
Bottom ...Layers: 3
Brim: 3mm
Set the print seam to the rear for a smoother print.
Designer
moXDesign3d model description
Liquid soap time saverThis is an attachment to save you having to wait for a small amount of liquid soap to trickle to the dispensing end of the bot...tle. Yes, there are other ways to solve this world problem but they don't involve messing around with 3D printers! :)
Unscrew the top, fit the WULBI and screw the top back on. Stand the bottle on the WULBI. Soap can be dispensed immediately!
3d model print parameters
Printer: Ender 3Resolution: 0.20 mm
Speed 50mm/s
Material: PETG
Nozzle Temp: 240°
Bed Temp: 70°
Infill: 10%
Walls: 3
Top Layers: 4
Bottom ...Layers: 3
Brim: 3mm
Set the print seam to the rear for a smoother print.
