1x2x3 bumpoid puzzle 3D for print
4895 Views 0 Likes 0 Downloads Download
T...wisty Puzzle Museum Entry:
http://www.twistypuzzles.com/cgi-bin/puzzle.cgi?pkey=5644
Stickers are available at
http://oliverstickers.com/stickers-for-3d-printed-puzzles/ryan-beam
NEW VIDEO + PROTOTYPES:
https://www.youtube.com/watch?v=bVbP9QI4sDQ
Video here:
https://www.youtube.com/watch?v=hlZFYVeFIGg
This puzzle applies the "bump" modification to the 1x2x3. A bump modification is when you cut off part of one side of a puzzle, then compensate for what you removed by adding that much on the opposite side. This continues until all 6 sides have been modified.
I was surprised that this actually took longer than 5 seconds to solve. Since there are no colors, trying to solve by shape causes an odd parity.
I was inspired by tallpawn's bump Jing's Pyraminx, here's a link:
http://www.thingiverse.com/thing:991897
UPDATED VERSION 2: Better than the last one, includes center cap+ improved turning quality.
Printrbot
Printer:
Simple Black
Infill:
10
Notes:
70mm/s on Printrbot Simple Metal, Separate into parts in Cura, Scale Up ...20x
Post-Printing
Hardware + Stickers
I used a random self-boring screw I had lying around, but the v2 has a pin as well. Stickers on the most recent version (Not the one in the video) from Oliver's Sticker Shop.
Designer
ryanpuzzle3d model description
IMPORTANT: Separate all of the pieces in your slicer, scale up 20x. V2 Includes a pin, if that doesn't work PM me and I will see about fixing it.T...wisty Puzzle Museum Entry:
http://www.twistypuzzles.com/cgi-bin/puzzle.cgi?pkey=5644
Stickers are available at
http://oliverstickers.com/stickers-for-3d-printed-puzzles/ryan-beam
NEW VIDEO + PROTOTYPES:
https://www.youtube.com/watch?v=bVbP9QI4sDQ
Video here:
https://www.youtube.com/watch?v=hlZFYVeFIGg
This puzzle applies the "bump" modification to the 1x2x3. A bump modification is when you cut off part of one side of a puzzle, then compensate for what you removed by adding that much on the opposite side. This continues until all 6 sides have been modified.
I was surprised that this actually took longer than 5 seconds to solve. Since there are no colors, trying to solve by shape causes an odd parity.
I was inspired by tallpawn's bump Jing's Pyraminx, here's a link:
http://www.thingiverse.com/thing:991897
UPDATED VERSION 2: Better than the last one, includes center cap+ improved turning quality.
3d model print parameters
Printer brand:Printrbot
Printer:
Simple Black
Infill:
10
Notes:
70mm/s on Printrbot Simple Metal, Separate into parts in Cura, Scale Up ...20x
Post-Printing
Hardware + Stickers
I used a random self-boring screw I had lying around, but the v2 has a pin as well. Stickers on the most recent version (Not the one in the video) from Oliver's Sticker Shop.
