Yet another toilet paper roll holder 3D for print
1951 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Inspired by MontagueFlange's http://www.thingiverse.com/thing:2118083 , for the longest time thinking about how to design a simpl...e but elegant toilet paper holder, I finally made this.
Just cut a piece of 1/2 inch PVC pipe to length to hold the roll.
Since there is only one screw, stick a double sided tape to the back of the brackets to prevent them from twisting when mounted.
Install as shown in the picture.
Enjoy!
Designer
Bok NgSinco3d model description
Toilet Paper HolderInspired by MontagueFlange's http://www.thingiverse.com/thing:2118083 , for the longest time thinking about how to design a simpl...e but elegant toilet paper holder, I finally made this.
Just cut a piece of 1/2 inch PVC pipe to length to hold the roll.
Since there is only one screw, stick a double sided tape to the back of the brackets to prevent them from twisting when mounted.
Install as shown in the picture.
Enjoy!
