Yoda - lite - more face less robe and a bit bigger 3D for print
2348 Views 0 Likes 1 Downloads Download
He is about 70...mm high but wider so should fit on most Prusa's and Huxley's :)
He is printed in Greenery Green PLA from Faberdashery.
60mm/sec speed 0.5mm nozzle 0.3mm layer.
*** Edit *** Jan 2012 - I had the wrong model uploaded ! - if you want the version with less robe and more face, then download the new STL called 70mm_Faberdashery_Yoda-Lite_less_robe.stl - That's the correct one I originally used and it's 70.89mm high.
The other model is just the same as Yoda lite but bigger (95.64mm) - Sorry about that.
Thanks to richgain for spotting this mistake.
- filament
- luck
- force :)...
Designer
Richard Horne3d model description
Sorry for posting another Yoda, in my defense, this was one of the original ones (remixed by Faberdashery) way back in October 2012 :)He is about 70...mm high but wider so should fit on most Prusa's and Huxley's :)
He is printed in Greenery Green PLA from Faberdashery.
60mm/sec speed 0.5mm nozzle 0.3mm layer.
*** Edit *** Jan 2012 - I had the wrong model uploaded ! - if you want the version with less robe and more face, then download the new STL called 70mm_Faberdashery_Yoda-Lite_less_robe.stl - That's the correct one I originally used and it's 70.89mm high.
The other model is just the same as Yoda lite but bigger (95.64mm) - Sorry about that.
Thanks to richgain for spotting this mistake.
3d model print parameters
- Printer- filament
- luck
- force :)...
