Airbus a220-100 - modern jet airplane - 1:144 3D for print


 Airbus a220-100 - modern jet airplane - 1:144  3d model for 3d printers

 Airbus a220-100 - modern jet airplane - 1:144  3d model for 3d printers
 Airbus a220-100 - modern jet airplane - 1:144  3d model for 3d printers Airbus a220-100 - modern jet airplane - 1:144  3d model for 3d printers Airbus a220-100 - modern jet airplane - 1:144  3d model for 3d printers Airbus a220-100 - modern jet airplane - 1:144  3d model for 3d printers
1590 Views 1 Likes 0 Downloads Download

Designer

Clerx

3d model description

Airbus A220-100 - Modern Jet Airplane - 1:144
This is the first model I designed, it is less detailed and has fewer features then my other models (cu...lts3d.com/en/users/CLERX/creations) but is still very accurate and easy to print.

If you like this model please consider having a look at my other models or supporting me with a donation.

Model features:

Windows, flaps, ailerons, elevators, fan blades and the rudder are all modelled.
Completely snap-fit, no glue required.
Universal stand mount shared between all my models.
Length: 25 cm (9,8"), width: 24,5 cm (9,8")

Some information about this aircraft:

The Airbus A220 (also known as the Bombardier C Series) represents the fusion of performance and technology, allowing airlines to connect distant points on continents or sectors that were previously unprofitable or impossible. With broad seats, plenty of overhead storage space and large windows, it’s a single-aisle aircraft that feels like a wide-body jet.

The A220’s advanced aerodynamics combined with specifically-designed Pratt & Whitney PurePower PW1500G geared turbofan engines contribute to an aircraft that delivers 20% lower fuel burn per seat than previous generation aircraft, half the noise footprint, and decreased emissions, making it a true community-minded jetliner


3d model print parameters

The basic print settings are:

Layer height: 0.2mm (can be lowered to your preference)
Infill: 0% (except for the stand)
Wall line count: 2
Nozzl...e width: 0.4mm
No supports and no bed adhesion should be required.

Please read the print guide for more detailed print settings per part.

Print Guide

Engines
Simply print the Fan-Blades.stl file twice, separately to avoid excessive retractions while printing the blades. A layer height of 0.2mm will give the best result for the turbine blades. Print the Engine-Left and Engine-Right.stl.

Fuselage
Make sure your bed is correctly levelled to minimize the seam between the two fuselage sections.

Wings & Stabilizers
Make sure these parts are rotated 45° on your build-plate to minimize stepping. Printing these parts with a wall line count of 1 will give them a smoother surface, but will also make the parts more fragile.

Pin & Stand
Adjust the scale of these parts as necessary to minimize the seam between the fuselage sections. Use 20% infill for the stand.

Assembly
Before you start assembling you need to cut the support material from the fan blades. To get the fan blades out of their support, start by cutting the 4 connecting rods on the bottom and then cut underneath the blades until the support comes off.

Start by attaching the horizontal and vertical stabilizers to the aft fuselage section. Insert the pin in one of the fuselage sections and connect the sections together. Connect the wings to the fuselage. Insert the fan blades in the nacelles and attach them to the wings. Finally, place the model on the stand


Tags

Airplane Airliner Aircraft Jet Plane Airbus Boeing a220

License

CC Atribution

Related 3d models with tags

Boeing 747SP – 1:200

Boeing 747SP – 1:200

Little plane

Little plane

Ultimaker Airplane Model

Ultimaker Airplane Model

Cessna 206 Celling tethered airplane toy

Cessna 206 Celling tethered airplane toy

Van's RV-7 (High Resolution Assembly Model)

Van's RV-7 (High Resolution Assembly Model)

Cessna 172 Kit Card

Cessna 172 Kit Card

Wing tip of RC airplane KRAGA Kodo

Wing tip of RC airplane KRAGA Kodo

STAND for SCIFI STUKA BOMBER

STAND for SCIFI STUKA BOMBER

Yak-52

Yak-52

SCI-FI STUKA BOMBER

SCI-FI STUKA BOMBER

Airbus A320

Airbus A320

A-29 Super Tucano Kit Card

A-29 Super Tucano Kit Card

No Glue Remix of Flowalistik's Stoyries - Low-Poly Plane

No Glue Remix of Flowalistik's Stoyries - Low-Poly Plane

Horten Ho-229

Horten Ho-229

Van's RV-7 Assembly Model

Van's RV-7 Assembly Model

Hawker Hurricane

Hawker Hurricane

Focke-Wulf Fw 190

Focke-Wulf Fw 190

Volantex Ranger Ex / Quanum Observer Wings top plate camera mount

Volantex Ranger Ex / Quanum Observer Wings top plate camera mount

Ranger Ex / Quanum Observer canopy

Ranger Ex / Quanum Observer canopy

EMB 314 Super Tucano

EMB 314 Super Tucano

Ranger Ex / Quanum Observer under wing plate frame

Ranger Ex / Quanum Observer under wing plate frame

F22 Raptor Kit Card

F22 Raptor Kit Card

C-130 Hercules Kit Card

C-130 Hercules Kit Card

Airplane

Airplane

Toy Plane

Toy Plane