And another um2 feeder design. 3D for print
7627 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This design is influenced a lot by the designs of |robert| & "Geeks". Thanks for your great work !!!
https://www.youmagine.com/designs/alternative-um2-feeder-version-two
https://www.youmagine.com/designs/extruder-um2-version-2
And a big thanks to Ultimaker for the published STEP files I could use to take the measurements from!!
update: 30/6/14 > added a little knob for easy spring adjustment (see last picture)
update; 2/7, as cor3ys already mentioned in the forum the arms holding the bearing are a bit to short (sorry, I only tested at low speeds...) updated the file. Version nr. 25 of the front and back arm have 2mm increased length.At the same time made a little change for easier installing the m3 x 50mm bolt...
I would like to use a long m3x60 hex bolt, but could not find one... took a (non hex) m3 x 50 bolt and placed a normal hexnut on it w...ith "bison lock bond" to make a hexbolt....
Designer
UltiArjan3d model description
a new feeder based on a combination of what I liked about the designs of |robert| and "Geeks" Please visit the UM forum for more background and instru...ctions; http://umforum.ultimaker.com/index.php?/topic/4393-ultimaker2-feeder-system-improvements-and-ideas/page-28This design is influenced a lot by the designs of |robert| & "Geeks". Thanks for your great work !!!
https://www.youmagine.com/designs/alternative-um2-feeder-version-two
https://www.youmagine.com/designs/extruder-um2-version-2
And a big thanks to Ultimaker for the published STEP files I could use to take the measurements from!!
update: 30/6/14 > added a little knob for easy spring adjustment (see last picture)
update; 2/7, as cor3ys already mentioned in the forum the arms holding the bearing are a bit to short (sorry, I only tested at low speeds...) updated the file. Version nr. 25 of the front and back arm have 2mm increased length.At the same time made a little change for easier installing the m3 x 50mm bolt...
3d model print parameters
some M3 boltsI would like to use a long m3x60 hex bolt, but could not find one... took a (non hex) m3 x 50 bolt and placed a normal hexnut on it w...ith "bison lock bond" to make a hexbolt....
