Bike flashlight mount 3D for print
4546 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
1 M5 bolt
1 M4 nut
1 M5 nut
1 M4 locknut
2 D4 washers
1 D4 spring...
Designer
Egrojyos3d model description
This is a design based on http://www.thingiverse.com/thing:267045 I've added a knee with fixed points to turn the light up and down and use low beams ...and high beams light. This is for 24 mm diameter flashlight, and 22,5 mm handlebars.. Now I want to modify it to correct the handlebar curvature.3d model print parameters
2 M4 bolts1 M5 bolt
1 M4 nut
1 M5 nut
1 M4 locknut
2 D4 washers
1 D4 spring...
