"braq" jointed dragon 3D for print
3035 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
A challenge for your printer !!
"Braq" is a jointed dragon of 42 pieces. 1 to 3mm thick to join them.
Author: http://www.soniaverdu.es/
...
The pieces have little contact surface to the bed, so it is very important to snug bed printer.
When setting the gcode file, add membersh...ip brim or raft. No need to add any additional support because the files include small supports have to eliminate once printed.
Printed 0.2 mm height, fill density 10%, PLA
3D file format: STL and ZIP
Last update: 2018/11/20 at 14:59
Publication date: 2016/02/02 at 19:50
Designer
The 3D models of BQ_3D3d model description
A challenge for your printer !!
"Braq" is a jointed dragon of 42 pieces. 1 to 3mm thick to join them.
Author: http://www.soniaverdu.es/
...
3d model print parameters
The pieces have little contact surface to the bed, so it is very important to snug bed printer.
When setting the gcode file, add membersh...ip brim or raft. No need to add any additional support because the files include small supports have to eliminate once printed.
Printed 0.2 mm height, fill density 10%, PLA
3D file format: STL and ZIP
Last update: 2018/11/20 at 14:59
Publication date: 2016/02/02 at 19:50
