Print your own heart-shaped box for your sweetheart. ...
3d model print parameters
Print 1 of every file in PLA. All .STL files are already oriented with the correct flat side facing down.
Insert the hearts of the ÂRibbon into th...e heart-shaped holes of the ÂLid.
Insert the small heart of the ÂBow into the heart-shaped hole of the ÂRibbonÂ.
Put the ÂLid on the Base.
We printed this at standard resolution with 3% infill. The ribbon took 5 minutes, the lid took 15, the bow took 5, and the base took 15. There are four files.