Cat-hat 3D for print
1166 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Description
I made this because my husband thought that the AT-AT model I made should have cat ea...rs and a hat. I thought it would be a fun joke that would take a few hours but I ended up taking over a month. It has been a good project to learn about articulating joints and 3d printing in general.
It is not a perfect model and I may work on it in the future. The sockets are prone to breakage. If you make this, please let me know any suggestions you have for improvement!
Print quantity
4x foot
4x lower leg
4x leg socket
3x tail (As pictured. More or fewer to make tail longer / shorter.)
1x everything else
Instructions
Snaps together. No gluing necessary, unless you want the hat to stay on permanently. Filing may be needed on head socket and tail ball pegs depending on how you print it.
0.20mm layer height
100% infill on tail ball and head socket, 20% infill for the rest
...
Supports needed.
Designer
voxinaudita3d model description
A cross between an AT-AT and the Cat in the Hat.Description
I made this because my husband thought that the AT-AT model I made should have cat ea...rs and a hat. I thought it would be a fun joke that would take a few hours but I ended up taking over a month. It has been a good project to learn about articulating joints and 3d printing in general.
It is not a perfect model and I may work on it in the future. The sockets are prone to breakage. If you make this, please let me know any suggestions you have for improvement!
Print quantity
4x foot
4x lower leg
4x leg socket
3x tail (As pictured. More or fewer to make tail longer / shorter.)
1x everything else
Instructions
Snaps together. No gluing necessary, unless you want the hat to stay on permanently. Filing may be needed on head socket and tail ball pegs depending on how you print it.
3d model print parameters
Printed on an Original Prusa i3 MK2S using eSUN PETG and PLA.0.20mm layer height
100% infill on tail ball and head socket, 20% infill for the rest
...
Supports needed.
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
